With today’s economy, it is advisable to save money every way possible. Water conservation should be on top of that list to protect our natural resources. What could you do to your bathroom that would save water in the long-term? Have you got money in your budget to add some new appliances such as a water efficient faucet or a new toilet? If so, you could use some of these suggestions to improve your home and save money at the same time.
WaterSense ® and the US Environmental Protection Agency (EPA) partnered to provide you with water-efficient products. The label ensures you are purchasing products which have been tested and are at a minimum of 20% more proficient in comparison to other products on the market.
Perform a visual inspection of your pipes in the bathroom under the sink, tub, shower, and toilet. A small pinhole leak can add up quickly. Up to 90 gallons of water can be wasted daily from leaky pipes and valves. You can reduce your water bill approximately 10% by repairing the damaged pipes. It is possible to waste over 3,000 gallons annually if a leak continues to drip at the rate of one drip per second.
If you are living in an older home, chances are you have a showerhead unit that can consume 5.5 gallons of water each minute. Technology provided a unit in 1992 which would only use 2.5 gallons per minute. By replacing the showerhead, you could easily save 2,900 gallons of water annually.
The comparison of using an older toilet that will use a minimum of 3.6 gallons to flush versus 1.6 for a newer model is a no brainer. Annually, you can move away from the possible total of 26,000 gallons to around 11,000 gallons for toilet flushes alone.
After you have remodeled your bathroom space with water-efficient products, you should attempt to change some of your usage patterns. You could begin by turning the water off while you shave or brush your teeth. Consider placing a low-flow aerator in your sink. Older faucets consumed approximately 3 gallons each minute. A new model low-flow faucet uses approximately 1-1/2 gallons of water per minute.
Consider taking a shower versus a bath. A five-minute shower will use approximately 9 ¼ gallons of water, whereas a full bath could take over 21 gallons. That is a huge savings for such a small gesture. If you are in an older home with nothing but a tub or a hand-held shower attachment; it might be time for a new shower installation.
Times are changing and over the past fifty years, the population has doubled in the United States. On average, in one day a person can consume between 80 to 100 gallons of water. By making several home improvements in your bathroom, you can save on water consumption and appreciate a lower water bill. If you don’t think you can handle the installation or replacement jobs yourself, there are always dependable plumbers in Leander TX to call on for help.